|
<< Click to Display Table of Contents >> Navigation: Technical Informations > CarteIO32 > Installation and configuration > Hardware configuration > ISA cards (or non "Plug and Play") |
By default, the base address (I/O address) of the ISA I/O cards installed by Netia is 0x350 (or 350 hexadecimal).
When several ISA I/O cards are installed on the same workstation, care must be taken to set the addresses to avoid a conflict, eg: a card at address 0x350 with a range of 8 bytes will occupy the addresses from 0x350 to 0x357 included.
Setting of the base address via 'jumpers' or mini-switches (minidip):
- For ISA 16-channel P16R16 ICP-DAS card this gives (350h):
Jumper # |
8 |
7 |
6 |
5 |
4 |
3 |
2 |
1 |
Position (1 or 0) |
1 |
1 |
1 |
0 |
1 |
0 |
1 |
0 |
Bit weight ( power of 2) |
n.u. |
9 |
8 |
7 |
6 |
5 |
4 |
3 |
Note for this card: jumper in Position 1 (or ON) = address bit at 1.
- For the ISA 8-way P8R8 ICP-DAS card this gives (350h):
Jumper # |
1 |
2 |
3 |
4 |
5 |
6 |
Position (1 or 0) |
0 |
0 |
1 |
0 |
1 |
0 |
Bit weight ( power of 2) |
9 |
8 |
7 |
6 |
5 |
4 |
Note for this card: jumper in Position 1 (or ON) = address bit at 1.
- For the ISA 8 way ACL/PCL-725 Advantech/ADClone this gives (350h) :
N° de cavalier |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
Position (1 ou 0) |
0 |
1 |
0 |
1 |
0 |
1 |
1 |
1 |
poids du bit (puissance de 2) |
8 |
7 |
6 |
5 |
4 |
3 |
2 |
1 |
Note for this card: The position of the jumpers represents an offset from the 0x200 address.