[HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\NETIA\NA-ER 4\NA_PILOT1]

"_Default Clock Source"="0"

Sets the default clock source.

0 = internal clock

1 = external clock (inter card connector)

2 = AES / EBU clock

3 = wordclock clock

4 = EBU video clock.

"Analog Input Gain"="0"

Gain in dB (-90 to +20) for the analog input.

"Analog Output Gain"="0"

Gain in dB (-90 to +20) for the analog output.

"Digital Input Gain"="0"

Gain in dB (-90 to +20) for the digital input.

"Digital Monitoring Gain"="0"

Gain in dB (-90 to +20) of digital monitoring.

"Digital Output Gain"="0"

Gain in dB (-90 to +20) for the digital output.

"Enable Record in Playlist"="No"

Enables simultaneous recording with broadcast of the built-in playlist to the driver.

"Num Relay Play Tally"="-1"

Sets a GPIO output number to be activated when in broadcast mode (for tally purposes, for example).

The affected GPIO card is the one defined in the Alarms subkey.

"Playlist Clock Source"="0"

Set the default clock in playlist mode (built-in driver playlist).

See _Default Clock Source for available values.

"Threaded Audio"="No"

Enables you to activate a specific operating mode for certain environments.

XML_ID,

XML_IP

XML_ID_BIND,

XML_Path,

XML_Port

Parameters specific to the "XML Emulation" mode.

Note: These values will only be created if XML_Emulation_Mode is at Yes.